通常用于手工检查,直am single element probes are ideal for scanning parts with regular geometry and relatively smooth contact surfaces. This includes flat or curved surfaces where you need to identify flaws or a backwall parallel to the surface or detect with a beam normal to the surface. With improved near surface resolution, you can use these probes along with a couplant layer (typically gel, oil, or paste) when you need to penetrate a thick section of material. Models include delay line, wear resistant and protective face.
Our straight beam transducers are perfect for manual inspection and flaw detection.
Applications include:
- Near surface flaw detection
- 检查薄片
- Inspection of thick sections or difficult to penetrate materials
- Composites and plastics
- Turbine blades
- General purpose, metal parts with simple geometry
- Manual inspection of plate, forging, bar, billets and castings
- Inpsection of tubing, piping, and tanks
- Lamination and delamination
- Bond testing
- Machine Components
- Shells
For European Customers:These probes are suitable for the DGS flaw sizing method, with a replaceable membrane that improves coupling on uneven or curved surfaces and extends transducer life.
Use with a standard side mount or optional top mount Lemo 1 (B..S) or Lemo 00 (MB..S) connector. High temperature delay lines are also available.
For North American Customers:These probes can be used with three types of protective face with a membrane that improve coupling on uneven or curved surfaces. The wear cap extends transducer life indefinitely when replaced periodically.
Use with a side or top mount BNC connector, along with a mature delay line to enable testing on surfaces up to 400°F (200°C).
These probes are best for inspecting metals with a higher gain reserve than protective face models. They’re rugged with a permanent abrasion-resistant wear plate, with a comfortable grip that makes them easy to use and fingertip models available for access to tight spaces you might often encounter.
For European Customers:Probe models have side mounted Lemo 00 connectors, side mounted Microdot on K..K and G..K types.
For North American Customers:Probe models use BNC connectors (side or top mount), side mounted Microdot on F type.