DV production packer

Improve the efficiency and economics of your workovers with theDV™ retainer production packerfrom Baker Hughes. By combining the advantages of the provenD™ permanent packerwith the flexibility of theL-10™/R-10™on-off sealing connector, the DV packer isolates your well’s lower zones to improve intervention and stimulation operations.

Get assured zonal isolation in wide-ranging applications

The DV packer’s NACE metallurgy and non-elastomeric seal stacks ensure a packer system that can stand up to virtually all well conditions, even the harshest HP/HT applications.

要么E-Line上运行并设置DV封隔器,使用the Baker HughesE4™ setting tool, or a workstring, using theJ hydraulic-setting tool—all in a single run. Running the DV packer with the L-10 on/off connector alleviates common problems associated with using blanking plugs in the tailpipe of packers.

By installing a blanking plug in the L-10 seal nipple profile, the DV production packer is converted into a temporary bridge plug. This configuration lets you reliably isolate a lower zone, thus enabling you to remove the tubing string or perforate and stimulate an upper zone.

The location of the setting nipple also prevents the packer tailpipe from being fouled by gun debris, stimulation settlings, or fill from upper zones. As a result, debris removal from the locks is improved, thus enhancing the reliability of plug retrieval.

Contact us to learn how the DV retainer production packer can optimize your well intervention economics.